• A5 Landscape Card - Forth Rail Bridge 04
  • Shop
  • A5 Landscape Card - Forth Rail Bridge 04

A5 Landscape Card - Forth Rail Bridge 04

Product Code: IC018698

Share

WATERMARK WILL NOT APPEAR ON THE PURCHASED CARD

Post and Packing FREE

A5 size in inches 5.8″ x 8.3″

A5 size in metric 14.8 x 21cm

This is one of a series of A5 Cards featuring landmarks in Edinburgh.   The card supplied with a decorative border and will be supplied with an envelope.  

The first crossing is begun

The first crossing of the Forth by the railway came in 1850 when the Edinburgh, Leith and Granton Railway started the world’s first ‘train ferry’ – a ferry boat specially designed by Thomas Bouch to take railway coaches – between Granton and Burntisland.

In August 1873 the North British Railway obtained authority to build a railway bridge across the Firth of Forth and construction of a suspension bridge, also designed by Thomas Bouch, began in 1878. However when Bouch’s original Tay Bridge collapsed during a storm in December 1879, work on his bridge across the Forth stopped immediately pending a full inquiry.

Bouch’s suspension bridge plans were abandoned in 1881 and designs for a new bridge were invited by the newly formed Forth Bridge Railway Company which had been established jointly by those railway companies who had most to gain from a railway crossing the Forth: the North British Railway, the Midland Railway and the North Eastern and Great Northern railways.

New plans are made

The bridge was to cross the Forth between South Queensferry, now part of Edinburgh and North Queensferry in Fife, making use of the island of Inch Garvie a little way from the north shore. Its design had to conform to specifications from both the admiralty who stipulated that the Forth remained a navigable channel, and the Board of Trade, concerned by the recent Tay Bridge disaster, who stipulated that the bridge must be rigid and stiff and capable of carrying the heaviest freight trains.

John Fowler and his partner Benjamin Baker were engaged by the Forth Bridge Company to develop their cantilevered design for the bridge which took into account these restrictions. The contract for its construction was let to Messers Arrol & Co of Glasgow in 1882 and work on the bridge started in 1883.

Bridge building on a vast scale

The Forth Bridge has three double cantilevers with two 1700ft suspended spans between them, at the time the longest bridge spans in the world. As required by the Admiralty, the rail level is 150ft (46m) above high water. Each of the towers has four steel tubes 12ft (3.7m) in diameter and reach to a height of 361ft (110m) above high water. Their foundations extend 89ft below this into the river bed, making the total height from foundations to the top of the towers 137 metres. The total length of the bridge, including its approach viaducts is 2,467 metres. The main structure itself measures 1,630 metres portal to portal.

Baker and Fowler’s bridge was the first major construction in Britain to be made from steel; the bridge incorporates 53,000 tonnes of the material.

The design of the bridge was very carefully balanced, with allowance being made for a maximum thermal expansion of 16½ inches (420mm) over the 5350ft (1630m) steel central structure. It incorporated 6.5 million rivets, which aggregated 4,200 tons weight alone. It was designed to withstand a wind force of 56lb per square foot.

Foundations and steelwork

Building the foundations for the vast towers started with the construction of huge caissons which were built on site and sunk using compressed air. The first of the caissons was floated into position on 26 May 1884.

By 1886 all the foundations were in position ready to take the steelwork. Thanks to the organisation and inventiveness of William Arrol, the bridge was completed in November 1889, just 6 years after work started (although at the time the weather was particularly cold and Arrol had to wait for milder weather conditions before the enormous structure expanded sufficiently for the final rivets to be inserted).

Overall the bridge cost £3m to build and employed a workforce of 4,600 men at the height of construction.

After all testing and inspections of the bridge were completed, it was formally opened by the Prince of Wales (later King Edward VII), who drove home a final gold plated rivet, on 4 March 1890. At the same ceremony, he also knighted Benjamin Baker.

Painting the Forth Bridge

In 2001 a major refurbishment project on the Forth Bridge was announced. Over the following 10 years, sections of the bridge were covered with significant scaffold access systems with specially prepared screening to prevent debris from the sandblasting and paint affecting or contaminating the environment.

After removing the old paint back to the metal, any steelwork that required maintenance was repaired before the new paint was applied.

After thorough cleaning of the steel structure, paint was then applied in three protective layers, both by airless spray and by hand in areas particularly difficult to access, over an area of 230,000 square metres.

The techniques and paint used during the refurbishment means that the bridge will not require a full paint for at least 20 years, finally putting an end to the myth that ‘painting the Forth Bridge’ is a never-ending task.

Also, these cards can be converted into framed pictures, so make sure that you take a look at the video showing you how to do this. 

All packages are shipped Royal Mail first class mail by default.

First class mail can take 2 to 5 business days unless otherwise stated in the listing. INTERNATIONAL CUSTOMERS Please note, these are only estimates from the Royal Mail website. Please allow plenty of time for your package to arrive for your big day. I cannot and will not guarantee shipping to any location by a certain time. I can, however, give you a firm ship date from my end.

INTERNATIONAL BUYERS PLEASE READ:

Please be aware your country may charge additional customs duty and/or import taxes.

Please also be aware that as the seller we do not pay for any applicable duty, value added taxes (VAT) or import consumption taxes charged to you by your country.

The recipient of the merchandise will be required to pay the duty or VAT upon delivery. Due to import duty valuation adjustments and currency valuations, we are unable to provide an estimate for duty or VAT.

DIGITAL FILES
Due to the nature of these items, refunds cannot be accepted once the first proof is sent.

PRINTED INVITATIONS
Refunds are not accepted on these items unless there was error on our part.

GREETING CARDS
All non custom cards can be returned with in 7 business days of delivery. Refund will not be given until item is returned in it's original condition. If item arrives damaged, a photo of the packaging and damaged item are required.

INSTANT DOWNLOADS
Due to the nature of this product, no refunds will be given.

About Designer Alan and Barry

www.icangetitonline.com is a marketplace for creativity.  Barry Freestone heads up a group of like minded crafters, artists and creatives to bring you an amazing source of creativity, whether downloads, materials or finished arts and crafts. 

Many of you will remember Barry as part of the Alan & Barry team who were the pioneers of the craft strand at Ideal World and came up with the idea for Create and Craft, the first dedicated craft channel.  Although Alan is now taking life a bit easier, he continues to help and support Barry with ideas, innovation and the odd demonstration.    There is a massive Alan & Barry video archive and much of that is available on the site or direct on YouTube. 

In addition to their collaboration on TV, they have also written 7 best selling craft books with worldwide sales in excess of 250,000 copies in several languages.